Case Study
Newsome Supplies 600kW Temporary Boiler for YMCA Milton Keynes
Overview
Client: YMCA Milton Keynes
Industry: Charity / Non-Profit Sector (Youth Accommodation and Community Services)
Project Overview: Eight-week industrial boiler hire solution, including a 600kW oil-fired boiler, 4,500-litre fuel tank, specialist delivery, installation and commissioning.
Newsome was appointed to provide a temporary boiler hire solution for YMCA Milton Keynes, supplying a high-capacity heating system for an eight-week period.
The project required a 600kW oil-fired boiler, supported by a dedicated 4,500-litre fuel tank and the necessary hoses, electrical cables and connection adaptors. With installation scheduled over a weekend, careful coordination of equipment delivery, positioning, mechanical connections and commissioning was central to the project. Newsome provided a complete temporary boiler hire package, combining specialist heating equipment with experienced engineers and the logistical support needed to prepare the system for operation.
The Challenge: Providing Reliable Temporary Heating
YMCA Milton Keynes required a substantial temporary heating solution capable of connecting to the building’s existing heating infrastructure.
The installation presented several practical considerations, including positioning a large packaged boiler, providing sufficient fuel storage and routing temporary pipework into the building. The temporary system also needed to be integrated with the existing heating circuit through appropriately sized flow and return connections. With an eight-week hire period planned, the equipment needed to be suitable for extended operation rather than a short-term heating intervention.
A further consideration was the installation programme. The boiler was scheduled for delivery on a Friday, with engineers attending the following day to complete installation and commissioning. This required a coordinated approach to transport, equipment handling and site engineering at the weekend.
The Solution: 600kW Oil-Fired Boiler Hire
Newsome specified a 600kW oil-fired temporary boiler, providing a substantial source of heating capacity for the building. The packaged boiler was supplied with the ancillary equipment required to support its temporary installation.
The equipment package included:
- 600kW oil-fired boiler: Providing the heating capacity required for the temporary installation.
- 4,500-litre fuel tank: Dedicated on-site fuel storage to support boiler operation.
- Temporary hoses and adaptors: Allowing the boiler to be connected to the existing heating system.
- Electrical cabling: Providing the necessary connections for the temporary equipment.
- Specialist transport and positioning: Coordinated delivery and movement of the boiler into its designated location.
- Professional installation and commissioning: Attendance by Newsome engineers to install and prepare the boiler for operation.
By supplying the boiler alongside the associated fuel storage and connection equipment, Newsome provided an integrated temporary heating package rather than simply delivering a standalone unit.
Specialist Delivery and Boiler Positioning
Following delivery, the unit was to be carefully moved into its designated operating position using specialist skates. This method of positioning was selected to accommodate the practical requirements of the site and allow the packaged boiler to be placed where the temporary heating connections could be made.
The installation arrangement included temporary flow and return pipework routed into the building. A supporting Unistrut bracket above the doorway formed part of the planned pipework arrangement, helping provide an appropriate route for the temporary connections. The boiler installation was designed around 2-inch BSP female flow and return connection points.
Careful consideration of equipment positioning and pipework routing is particularly important on temporary boiler projects, where the installation must be effective without requiring extensive alterations to the permanent heating infrastructure.
Weekend Installation and Commissioning
Following the scheduled Friday delivery, Newsome engineers were arranged to attend on Saturday to install and commission the temporary boiler.
The installation programme also included the delivery of an initial 4,500 litres of fuel on the Saturday morning. The temporary boiler arrangement incorporated a 400V, 16A, three-phase electrical connection with a five-pin socket. Newsome’s installation and commissioning service covered the connection and preparation of the temporary heating equipment for operation.
Commissioning is an essential stage of any industrial boiler hire project. It allows the installation to be checked before the equipment is placed into service, including relevant operating controls, safety arrangements and heating circuit connections. By coordinating delivery, fuel provision and engineering attendance within a defined programme, Newsome developed a practical installation plan intended to minimise the time between equipment arrival and availability for use.
Eight Weeks of Temporary Heating Support
The boiler was specified for an eight-week hire period, providing a temporary heating solution while the building required an alternative source of heat.
For installations of this duration, equipment suitability, safe operation and access to technical support are important considerations. Newsome’s wider boiler hire service includes maintenance, servicing and technical assistance, helping customers manage their temporary heating requirements throughout the rental period. At the end of the hire, the agreed service also provided for equipment decommissioning and removal.
This end-to-end approach allows organisations to obtain the equipment and associated engineering services through a single specialist supplier.
Why Newsome Was the Right Partner
The YMCA Milton Keynes project demonstrates the practical benefits of working with an experienced industrial boiler hire specialist.
The requirement involved more than supplying a 600kW boiler. It also called for coordinated equipment transport, specialist positioning, fuel storage, temporary mechanical and electrical connections, and weekend engineering attendance. Newsome brought these elements together within a single temporary heating proposal.
Established in 1973, Newsome has over 50 years of experience supporting commercial and industrial customers with heating, cooling and temperature control equipment. Our nationwide boiler hire service covers emergency breakdowns, planned maintenance, refurbishment projects and longer-term temporary heating requirements. With a hire range extending from compact electric boilers to large packaged industrial units, Newsome can provide heating solutions suited to a wide variety of applications.
Need Temporary Boiler Hire?
Whether you require temporary heating for a commercial building, emergency boiler hire following equipment failure or a planned installation during plant maintenance, Newsome can help.
We supply industrial and commercial boilers with nationwide delivery, installation, commissioning and ongoing technical support.
Contact Newsome today to discuss your temporary boiler hire requirements.
Call 01422 371711 or enquire online for expert advice and a competitive quotation.