Industrial desiccant dehumidifier range for the flood & water damage professional, temporary humidity control, museums, research laboratories, silo headspace conditioning, dry air stores and small production processes.
Manufactured from 304 stainless steel as standard, these industrial dehumidifiers form our DC Series
All units include our high capacity D-Max ceramic silica gel rotor. On single phase units, reactivation heaters utilise positive temperature coefficient (PTC) thermistor technology and are self regulating for maximum safety and energy efficiency. Three phase units use resistive type heaters. All units include Auto-Manual mode switching and are pre-wired for simple humidistat connection via an Amphenol plug.
-
Additional information
Industrial desiccant dehumidifier range for the flood & water damage professional, temporary humidity control, museums, research laboratories, silo headspace conditioning, dry air stores and small production processes.
Manufactured from 304 stainless steel as standard, these industrial dehumidifiers are available in three configurations; Aquasorb (A30), Consorb (DC) and Recusorb (DR).
All units include our high capacity D-Max ceramic silica gel rotor. On single phase units, reactivation heaters utilise positive temperature coefficient (PTC) thermistor technology and are self regulating for maximum safety and energy efficiency. Three phase units use resistive type heaters. All units include Auto-Manual mode switching and are pre-wired for simple humidistat connection via an Amphenol plug.
-
DC Dehumidifier Range
RANGE:
- DC-5
- DC-10
- DC-20 T10
- DC-20 T16
- DC-30 T10
- DC-30 T16
- DC-31 T10
- DC-31 T16
- DC-50R
-
Design
- Fully Stainless Steel 304 unit construction
- Separate process and reactivation airflow to isolate application environment from fresh air loads.
- IP44 design for outdoor location as standard
- Internal G4 filter media for easy coupling onto a dirty system
- PTC electric heater for increased safety
-
Air Flow Circuit
- Dual fan configuration to separate fresh air from process air and minimize moisture load on application.
- High static pressure options on the volume flow to cater for most installation requirements without additional booster fan support.
- High efficiency fans to minimize running costs and heat gain as well as maximizing efficiency.
- Dual process return air inlet to provide fresh air intake option if required by process for minimum fresh air quantities.
-
Desiccant Wheel Technology
- Market leading desiccant rotor technology provided by the Seibu Giken group.
- D-MAX rotor technology as standard on all units.
- High efficiency honeycomb structure design for maximum moisture transfer and minimum pressure drop.
- Fully washable rotor allows efficiency and moisture transfer to be retained over the service life of the dehumidifier.
- Minimum of 10 years’ service life of rotor with proper maintenance schedule.
-
Electrical Circuit
- PTC electrical heater for increased safety
- IP44 design as standard
- 230V single phase operation (with exception of 3-phase DC-50R unit).
- 110V Site voltage options available.
- DC-50R linear heater control option available.
-
Controller Options
- EH4
- EH3 (Modbus BMS integration available)
-
Key Features
- Stainless steel 304 unit design as standard.
- Industry leading efficiency and greatest kg/hr moisture removal per kWh on market.
- Compact design for easy application and integration.